Characteristics of Mandibular Canal Branches Related to Nociceptive Marker.

It is difficult to correlate the direction of mandibular canal branches (MCBs) with altered sensation in dental treatments. In contrast, calcitonin gene-related peptide (CGRP) is related to vasodilation, bone formation, and the interaction with the peripheral nervous system. Therefore, we investigated the detailed morphological characteristics of MCBs using cone-beam computed tomography (CBCT) and observation of the CGRP distribution around the MCB. The MCB measurements were evaluated using principal component analysis (PCA) to identify morphological correlations. A total of 168 sides of mandibles from 84 cadavers were analyzed in this study. Most of the MCBs were primarily in the direction of the clock model from X to XI in sagittal sections and XII to I in coronal sections of the mandible. The structure of the MCB was divided into the fine canal branch (60.4%, 223/369), partial branch (24.4%, 90/369), and no canal branch (15.2%, 56/369). PCA indicated that the measurement element with the MCB and its structures were correlated in contrast to tooth factors. Positive CGRP reactions were clearly observed in the no-canal branch group compared to other groups. These data provide useful suggestions for MCB dynamics and information for clinical dental treatment.

Phase control of a z-current-driven plasma column.

A dynamic mitigation is presented for sausage and kink instability growths of a z-current-driven magnetized plasma column. In this Rapid Communication we found that a wobbling motion of the z-current electron axis induces a phase-controlled perturbation, so that the growths of the sausage and kink instabilities are successfully and remarkably mitigated. In general, plasma instabilities emerge from perturbations, and the perturbation phase is normally unknown. However, if the perturbation phase is known or actively imposed by, for example, a designed driver wobbling behavior, the instability growth would be controlled and mitigated by a superimposition of the perturbations imposed. The results in this Rapid Communication demonstrate that the wobbling z-current electron beam would provide an improvement in the plasma column stability and uniformity.

Non-uniformity smoothing of direct-driven fuel target implosion by phase control in heavy ion inertial fusion.

We have proposed a dynamic smoothing method based on a phase control to smooth plasma non-uniformities in perturbed plasma systems. In this paper, the dynamic smoothing method is applied to a spherical direct-driven fuel target implosion in heavy ion inertial confinement fusion. We found that the wobbling motion of each heavy ion beam (HIB) axis induces a phase-controlled HIBs energy deposition, and consequently the phase-controlled implosion acceleration is realized, so that the HIBs irradiation non-uniformity is successfully smoothed. HIB accelerators provide a well-established performance to oscillate a HIB axis at a high frequency. In inertial confinement fusion, a fuel implosion uniformity is essentially significant for achieving the DT fuel compression and for releasing the fusion energy, and the non-uniformity of the implosion acceleration should be less than a few %. The results in this paper demonstrate that the wobbling HIBs would provide an improvement in the fuel target implosion uniformity.

Peculiar behavior of Si cluster ions in a high-energy-density solid Al plasma.

Peculiar behavior is found in a Si cluster ion, moving with a speed of ∼0.22c (c: speed of light) in a solid Al plasma in the context of cluster-ion beam driven inertial confinement fusion: The Si ion, moving closely behind the forward-moving Si ion for a distance of several Šin the cluster, feels the wake field generated by the forward Si. The acceleration interaction force on the rear Si ion by the forward-moving ion may balance with the deceleration backward force in the longitudinal-moving direction. The forward-moving Si ion would be decelerated, as an isolated ion is decelerated without correlation. However, the deceleration of the rear Si ion, moving behind closely, would be reduced significantly. The rear Si ion may catch up and overtake the forward-moving Si ion in the cluster during the Si cluster-ion interaction with the high-density Al plasma. This peculiar behavior appears when the ions are aligned well longitudinally. The wake field is confined around the Si ion in the forward and transverse directions for a distance smaller than the Si cluster interionic distance l_{c}. However, the tail of the wake field extends beyond l_{c} due to the Si ion high speed of ∼0.22c. Therefore, the peculiar behavior shown above appears only for the ions in one cluster aligned well longitudinally.

Light-tunable Fano resonance in metal-dielectric multilayer structures.

High-Q optical Fano resonances realized in a variety of plasmonic nanostructures and metamaterials are very much promising for the development of new potent photonic devices, such as optical sensors and switches. One of the key issues in the development is to establish ways to effectively modulate the Fano resonance by external perturbations. Dynamic tuning of the Fano resonance applying the mechanical stress and electric fields has already been demonstrated. Here, we demonstrate another way of tuning, i.e., photo-tuning of the Fano resonance. We use a simple metal-dielectric multilayer structure that exhibits a sharp Fano resonance originating from coupling between a surface plasmon polariton mode and a planar waveguide mode. Using a dielectric waveguide doped with azo dye molecules that undergo photoisomerization, we succeeded in shifting the Fano resonance thorough photo-modulation of the propagation constant of the waveguide mode. The present work demonstrates the feasibility of photo-tuning of the Fano resonance and opens a new avenue towards potential applications of the Fano resonance.

Deficiency in WT1-targeting microRNA-125a leads to myeloid malignancies and urogenital abnormalities.

The Wilms' tumor gene WT1 is overexpressed in leukemia and solid tumors and has an oncogenic role in leukemogenesis and tumorigenesis. However, precise regulatory mechanisms of WT1 overexpression remain undetermined. In the present study, microRNA-125a (miR-125a) was identified as a miRNA that suppressed WT1 expression via binding to the WT1-3'UTR. MiR-125a knockout mice overexpressed WT1, developed myeloproliferative disorder (MPD) characterized by expansion of myeloid cells in bone marrow (BM), spleen and peripheral blood, and displayed urogenital abnormalities. Silencing of WT1 expression in hematopoietic stem/progenitor cells of miR-125a knockout MPD mice by short-hairpin RNA inhibited myeloid colony formation in vitro. Furthermore, the incidence and severity of MPD were lower in miR-125a (-/-) mice than in miR-125a (+/-) mice, indicating the operation of compensatory mechanisms for the complete loss of miR-125a. To elucidate the compensatory mechanisms, miRNA array was performed. MiR-486 was occasionally induced in compete loss of miR-125a and inhibited WT1 expression instead of miR-125a, resulting in the cancellation of MPD occurrence. These results showed for the first time the post-transcriptional regulatory mechanisms of WT1 by both miR-125a and miR-486 and should contribute to the elucidation of mechanisms of normal hematopoiesis and kidney development.

Nanometric locking of the tight focus for optical microscopy and tip-enhanced microscopy.

We have successfully stabilized the tight focus onto the sample surface of an optical microscope within ±1.0 nm for a virtually unlimited time duration. The time-dependent thermal drift of the tight focus and the mechanical tilt of the sample surface were simultaneously sensed by a non-optical means based on a capacitive sensor and were compensated for in real-time. This non-optical scheme is promising for the suppression of background light sources for optical microscopy. The focus stabilization is crucial for microscopic measurement at an interface, particularly when scanning a large surface area, because there is always a certain amount of mechanical tilt of the sample substrate, which degrades the contrast of the image. When imaging nanoscopic materials such as carbon nanotubes or silicon nanowires, more stringent nanometric stabilization of the focus position relative to such samples is required, otherwise it is often difficult to interpret the results from the observations. Moreover, the smaller the sample volume is, the smaller the signal becomes, resulting in a long exposure time at each position. In this sense, long-term stability of the tight focus is essential for both microscopic large area scanning and nanosized sample scanning (high-resolution/large-area imaging). In addition, the recently developed tip-enhanced microscopy requires long-term stability of the relative position of the tip, sample and focus position. We were able to successfully demonstrate a stability improvement for tip-enhanced microscopy in the same manner. The stabilization of the tight focus enables us to perform long-term and robust measurements without any degradation of optical signal, resulting in the capability of true nanometric optical imaging with good reproducibility and high precision. The technique presented is a simple add-on for any kind of optical microscope.

Electron bow-wave injection of electrons in laser-driven bubble acceleration.

An electron injection regime in laser wake-field acceleration, namely electron bow-wave injection, is investigated by two- and three-dimensional particle-in-cell simulation as well as analytical model. In this regime electrons in the intense electron bow wave behind the first bubble catch up with the bubble tail and are trapped by the bubble finally, resulting in considerable enhancement of the total trapped electron number. For example, with the increase of the laser intensity from 2 × 10(19) to 1 × 10(20) W/cm(2), the electron trapping changes from normal self-injection to bow-wave injection and the trapped electron number is enhanced by two orders of magnitude. An analytical model is proposed to explain the numerical observation.

Mass infection with Entamoeba histolytica in a Japanese institution for individuals with mental retardation: epidemiology and control measures.

After two cases of amoebic colitis were detected at an institution for the mentally retarded in the Yamagata prefecture of Japan, the prevalence and epidemiology of Entamoeba histolytica infection at the institution were investigated. When the 76 residents with mental retardation were checked by serology and stool examinations, 40 (53%) showed evidence of infection with E. histolytica (i.e. E. histolytica-specific antibodies in their serum, Entamoeba cysts in their stools, and/or E. histolytica-specific antigens in their stools). The cysts were all assumed to be those of E. histolytica since all nine of the 18 cyst-positive stool samples investigated using a PCR (that distinguishes E. histolytica from E. dispar) were found positive for this species. The E. histolytica found in the institution in Yamagata appears to have been brought into the institution, from a similar institution in Kanagawa prefecture, by a mentally retarded individual who relocated from Kanagawa to Yamagata. Isolates of E. histolytica recovered during an outbreak in the institution in Kanagawa appear genotypically identical to the genotyped isolates collected in the outbreak investigated in the present study. The 40 infected individuals in Yamagata were each treated for 10 days with metronidazole or diloxanide furoate. The residents and staff of the institution were encouraged to wash their hands more frequently and more thoroughly, and the staff were asked to clip residents' fingernails and to improve the cleanliness/sterilization of the surfaces in the institution that were most likely to be contaminated with E. histolytica (lavatories, handrails, doors, doorknobs, washrooms, clothing etc). In the last 5 years of follow-up since the instigation of these and other infection-control measures, and the last treatments, no cases of E. histolytica infection have been found in the institution. This encouraging result offers hope and guidance to those attempting to control outbreaks of E. histolytica infection in other institutions.

Simulations of vacuum laser acceleration: hidden errors from particle's initial positions.

Simulation of vacuum laser acceleration, because of its scheme's simplicity, attracts many people involved in. However, how to put the particle in the initial positions in the field has not been considered seriously in some such schemes. An inattentive choice of electron's initial conditions may lead to misleading results. Here we show that arbitrarily placing the particle within the laser field leads to an overestimation of its energy gain, and offer suggestions for selecting appropriate initial conditions.

Note: A sampling method for quantum random bit generation.

In this note, we present a new sampling method for quantum random bit generation. The new method requires only one single-photon detector and does not measure the time slots of emitted photons. A binary random bit sequence obtained is independent on the time slot of the pulses and the precision of the measurement instrument. The effect of the exclusive-or operation for eliminating the bias in the raw sequences is also discussed.

Nanoscale patterning induced strain redistribution in ultrathin strained Si layers on oxide.

We present a comparative study of the influence of the thickness on the strain behavior upon nanoscale patterning of ultrathin strained Si layers directly on oxide. The strained layers were grown on a SiGe virtual substrate and transferred onto a SiO(2)/Si substrate using wafer bonding and hydrogen ion induced exfoliation. The post-patterning strain was evaluated using UV micro-Raman spectroscopy for thin (20 nm) and thick (60 nm) nanostructures with lateral dimensions in the range of 80-400 nm. We found that about 40-50% of the initial strain is maintained in the 20 nm thick nanostructures, whereas this fraction drops significantly to approximately 2-20% for the 60 nm thick ones. This phenomenon of free surface induced relaxation is described using detailed three-dimensional finite element simulations. The simulated strain 3D maps confirm the limited relaxation in thin nanostructures. This result has direct implications for the fabrication and manipulation of strained Si nanodevices.

Prevalence and associations of epiretinal membranes in an adult Japanese population: the Funagata study.

PURPOSE: To determine the prevalence and risk factors of epiretinal membranes (ERM) in a Japanese population. PATIENTS AND METHODS: The Funagata Study examined 1758 Japanese aged 35 years or older (42% of eligible) from June 2000 to June 2002. A total of 1723 (98.0%) participants had non-mydriatic fundus photographs of the right eye to grade the presence of ERM, using the Blue Mountains Eye Study (BMES) protocol. After age standardization, the prevalence of ERM in the right eyes of the participants included in this study was compared with that reported from right eyes of participants in the BMES and the Beaver Dam Eye Study (BDES). ERM detected in eyes with diabetic retinopathy and other retinal lesions were excluded from the analysis of associations. Multiple logistic regression models were used to determine risk factors for the presence of ERM, adjusting for age and gender. RESULTS: There were 84 right eyes with ERM, representing 5.44% of this sample. After age standardization, the prevalence rate (5.7%) was within the range reported in the BMES (3.5%) and the BDES (6.9%). Older age (gender-adjusted odds ratio (OR) per 10 years: 1.72, 95% confidence interval (CI): 1.40-2.11) and diabetes (age-gender-adjusted OR: 1.84, 95% CI: 1.01-3.37) were the only two factors associated with ERM. CONCLUSIONS: We found a similar prevalence of ERM in the Japanese as in mainly white populations. Increasing age and diabetes were risk factors for ERM in this adult Japanese population.

Angiotensin-converting enzyme gene and retinal arteriolar narrowing: the Funagata Study.

The purpose of this study is to determine whether the angiotensin-converting enzyme (ACE) gene polymorphism is associated with retinal arteriolar narrowing, a subclinical marker of chronic hypertension. The Funagata Study examined a population-based sample of Japanese aged 35+ years; 368 participants had both retinal vessel diameter measurements and ACE insertion/deletion (ACE I/D) polymorphism analyses performed. Assessment of retinal vessel diameter and retinal vessel wall signs followed the protocols used in the Blue Mountains Eye Study. ACE gene polymorphisms D/D, I/D and I/I were present in 34 (9.2%), 170 (46.2%) and 164 (44.5%) participants, respectively, distributed in Hardy-Weinberg equilibrium. After multivariable adjustment, retinal arteriolar diameter was significantly narrower in subjects with the D/D genotype compared to subjects with I/D and I/I genotypes (mean difference -6.49 microm, 95% confidence interval (CI): -12.86 microm, -0.11 microm). Our study suggests that the ACE I/D polymorphism may be associated with subclinical structural arteriolar changes related to chronic hypertension.

Improvement of energy-conversion efficiency from laser to proton beam in a laser-foil interaction.

Improvement of energy-conversion efficiency from laser to proton beam is demonstrated by particle simulations in a laser-foil interaction. When an intense short-pulse laser illuminates the thin-foil target, the foil electrons are accelerated around the target by the ponderomotive force. The hot electrons generate a strong electric field, which accelerates the foil protons, and the proton beam is generated. In this paper a multihole thin-foil target is proposed in order to increase the energy-conversion efficiency from laser to protons. The multiholes transpiercing the foil target help to enhance the laser-proton energy-conversion efficiency significantly. Particle-in-cell 2.5-dimensional ( x, y, vx, vy, vz) simulations present that the total laser-proton energy-conversion efficiency becomes 9.3% for the multihole target, though the energy-conversion efficiency is 1.5% for a plain thin-foil target. The maximum proton energy is 10.0 MeV for the multihole target and is 3.14 MeV for the plain target. The transpiercing multihole target serves as a new method to increase the energy-conversion efficiency from laser to ions.

Femtosecond laser nano-ablation in fixed and non-fixed cultured cells.

To understand the onset and morphology of femtosecond laser submicron ablation in cells and to study physical evidence of intracellular laser irradiation, we used transmission electron microscopy (TEM). The use of partial fixation before laser irradiation provides for clear images of sub-micron intracellular laser ablation, and we observed clear evidence of bubble-type physical changes induced by femtosecond laser irradiation at pulse energies as low as 0.48 nJ in the nucleus and cytoplasm. By taking ultrathin sliced sections, we reconstructed the laser affected subcellular region, and found it to be comparable to the point spread function of the laser irradiation. Laser-induced bubbles were observed to be confined by the surrounding intracellular structure, and bubbles were only observed with the use of partial pre-fixation. Without partial pre-fixation, laser irradiation of the nucleus was found to produce observable aggregation of nanoscale electron dense material, while irradiation of cytosolic regions produced swollen mitochondria but residual local physical effects were not observed. This was attributed to the rapid collapse of bubbles and/or the diffusion of any observable physical effects from the irradiation site following the laser exposure.

A femtosecond laser pacemaker for heart muscle cells.

The intracellular effects of focused near-infrared femtosecond laser irradiation are shown to cause contraction in cultured neonatal rat cardiomyocytes. By periodic exposure to femtosecond laser pulse-trains, periodic contraction cycles in cardiomyocytes could be triggered, depleted, and synchronized with the laser periodicity. This was observed in isolated cells, and in small groups of cardiomyocytes with the laser acting as pacemaker for the entire group. A window for this effect was found to occur between 15 and 30 mW average power for an 80 fs, 82 MHz pulse train of 780 nm, using 8 ms exposures applied periodically at 1 to 2 Hz. At power levels below this power window, laser-induced cardiomyocyte contraction was not observed, while above this power window, cells typically responded by a high calcium elevation and contracted without subsequent relaxation. This laser-cell interaction allows the laser irradiation to act as a pacemaker, and can be used to trigger contraction in dormant cells as well as synchronize or destabilize contraction in spontaneously contracting cardiomyocytes. By increasing laser power above the window available for laser-cell synchronization, we also demonstrate the use of cardiomyocytes as optically-triggered actuators. To our knowledge, this is the first demonstration of remote optical control of cardiomyocytes without requiring exogenous photosensitive compounds.

Stress imagining of semiconductor surface by tip-enhanced Raman spectroscopy.

Tip-enhanced Raman imaging of strained silicon reveals the property of nanoscale stress imposed on the lattice. Our approach relies on the highly localized excitation provided by a metallized tip. Surface sensitive detections in nanoscale are realized by a reflection-mode configuration combined with 442-nm excitation and a silver-coated silicon nitride tip. The background signals from an underlying silicon germanium layer and a tip are well suppressed. The quantitative stress analysis is made on the basis of the Raman shift of the Si-Si phonon mode. We succeeded in visualizing the localized stress with a spatial resolution down to 25 nm whereas a conventional micro Raman technique provides only a uniform image because of the averaging effect within a diffraction-limited focused spot.

The metabolic syndrome and retinal microvascular signs in a Japanese population: the Funagata study.

AIMS: To determine the relationship of metabolic syndrome and its components with retinopathy and other retinal microvascular signs in a Japanese population. METHODS: The Funagata study recruited 1961 (53.3% of eligible) Japanese aged 35 or older. The metabolic syndrome was diagnosed primarily using definitions of the International Diabetes Federation. Retinopathy and retinal microvascular signs were assessed from fundus photographs. Retinal arteriolar and venular diameters were measured using a computer-assisted programme. RESULTS: Data were available for analysis in 1638 persons for retinopathy and retinal microvascular signs and 921 persons for retinal vessel diameters. Various components of the metabolic syndrome were associated with retinal microvascular signs: a larger waist circumference was associated with wider venular diameter and retinopathy lesions; a higher blood pressure level was associated with focal arteriolar narrowing, arteriovenous nicking, enhanced arteriolar wall reflex and narrower arteriolar diameter; and a higher triglyceride level was associated with enhanced arteriolar wall reflex. Overall, persons with the metabolic syndrome were more likely to have retinopathy (odds ratio 1.64, 95% CI: 1.02 to 2.64) and wider venular diameter 4.69 microm (95% CI: 1.20 to 8.19 microm) than persons without the metabolic syndrome. CONCLUSION: We report associations of metabolic syndrome components with retinopathy and wider venular diameter in Japanese adults. These data suggest that metabolic abnormalities, indicated by metabolic syndrome components, are associated with microvascular changes in the retina. There was no synergistic effect of the metabolic syndrome on retinal microvascular changes beyond its individual components.

The anisotropic nanomovement of azo-polymers.

Nanoscale polymer movement is induced by a tightly focused laser beam in an azo-polymer film just at the diffraction limit of light. The deformation pattern that is produced by photoisomerization of the azo dye is strongly dependent on the incident laser polarization and the longitudinal focus position of the laser beam along the optical axis. The anisotropic photo-fluidity of the polymer film and the optical gradient force played important roles in the light induced polymer movement. We also explored the limits of the size of the photo-induced deformation, and we found that the deformation depends on the laser intensity and the exposure time. The smallest deformation size achieved was 200 nm in full width of half maximum; a value which is nearly equal to the size of the diffraction limited laser spot.